Design Information

PRODUCT DIMENSIONS AND CLEARANCES NOTE: Appearance will vary by model.

21-1/2”

1”

13”

29-3/4”

19”

TOOLS AND PARTS REQUIRED (NOT SUPPLIED)

…#2 Phillips screwdriver

…Hand held drill

…High speed drill bit, 3/32diameter

…3/8slot head screwdriver

…Level

…Saw

…2x4 or 2x2 lumber for installing runners or 3/8plywood for floor (if required)

…Wood screws or other hardware for installing runner or shelf to support oven (if required)

…Safety glasses or goggles

PARTS SUPPLIED

…6 brass screws (3 required, 3 extra)

…5 color matched screws (4 required, 1 extra)

…Bottom trim

ELECTRICAL TOOLS AND PARTS REQUIRED (NOT SUPPLIED)

…Junction box

…Electrical cable (3-conductor or 4-conductor wire as required by local codes)

…UL-listed conduit connectors

…Wire cutters and wire strippers

ADVANCE PLANNING

These ovens may be installed directly into a 30” wide oven cabinet.

Cutout dimensions are NOT the same for installation with or without an accessory storage drawer. Make sure to use the correct cutout when preparing the opening.

NOTE: Model ZSC2202 CANNOT be installed with an accessory storage drawer. See Installation Preparation Without an Accessory Storage Drawer for this model.

IMPORTANT This oven is not approved for use above another built-in Advantium Speedcook oven, a side by side installation or below a countertop.

For personal safety, this oven cannot be installed in a cabinet arrangement such as an island or peninsula.

The oven must be installed at least 36-3/4" above the floor.

Allow for clearance to adjacent corners, walls, drawers, etc.

Cabinets installed adjacent to wall ovens must have an adhesion spec of at least 194ºF temperature rating.

The oven must be securely installed in a cabinet that is firmly attached to the house structure. Weight on the oven door could cause the oven to tip and result in injury. Never allow anyone to climb, sit, stand or hang on the oven door.

If installing the drawer accessory, the drawer must be assembled to the oven prior to installation into the cabinet. See the Accessory Storage Drawer Assembly Instructions.

3

Page 3
Image 3
GE PSB2200, ZSC2201, ZSC2200, ZSC2202, PSB2201 installation instructions Parts Supplied, Advance Planning

PSB2201, PSB2200, ZSC2202, ZSC2200, ZSC2201 specifications

The GE ZSC series, including models ZSC2201, ZSC2200, and ZSC2202, along with the PSB2200 and PSB2201, represents a significant advancement in the field of process automation and control. These devices are engineered to enhance industrial workflow efficiency through cutting-edge technology and user-centric design.

The ZSC2201, ZSC2200, and ZSC2202 are smart sensors that utilize advanced monitoring and diagnostic capabilities. They are equipped with high-fidelity sensing elements that allow for precise measurement and data acquisition. One notable feature is their ability to perform real-time monitoring of process variables, which supports proactive maintenance strategies and minimizes downtime. These models are designed with robust IP67-rated enclosures, making them suitable for harsh industrial environments while ensuring longevity and reliability.

In terms of communication, the ZSC series embraces modern protocols, including Modbus and EtherNet/IP, enabling seamless integration into existing automation systems. This interoperability facilitates the sharing of critical data across different platforms, ensuring that operators have access to real-time analytics and insights for informed decision-making.

On the other hand, the PSB2200 and PSB2201 are purpose-built for applications that require precision and reliability. These models feature enhanced signal processing algorithms, which improve accuracy in measurement and control tasks. The PSB series is particularly known for its energy efficiency and low power consumption, making them ideal for applications in remote or energy-sensitive locations.

Both PSB models also come equipped with user-friendly interfaces that simplify configuration and calibration processes. This ensures that operators can quickly adapt the devices to their specific workflow requirements without extensive training. Moreover, they support various input and output options, providing versatility in application scenarios.

The combination of innovative technology and user-oriented design in the GE ZSC and PSB series reflects GE’s commitment to enhancing industrial productivity and safety. As industries increasingly move towards digital transformation, these models are poised to play a crucial role in shaping the future of process automation and control systems. In summary, the GE ZSC2201, ZSC2200, ZSC2202, PSB2200, and PSB2201 exemplify the blend of reliability and advanced technology essential for modern industrial applications.