#GETUSERNAME Command, #IPCONFIG Command | Gefen EXT-DPKVM-441

RS-232 COMMANDS

#GET_USER_NAME Command

The #GET_USER_NAME command prompts for the Telnet username.

Syntax:

#get_user_name

Parameters:

None

#IPCONFIG Command

The #IPCONFIG command displays all TCP/IP settings. Syntax:

#ipconﬁg

Parameters:

None

#RSTIP Command

The #RSTIP command resets the IP conﬁguration to the default settings. Syntax:

#rstip

Parameters:

None

16

Image 19

Gefen EXT-DPKVM-441 user manual #GETUSERNAME Command, #IPCONFIG Command, #RSTIP Command

Contents

4x1 Dpkvm Switcher Write To Asking for AssistanceTechnical Support Technical Support Hours Contents How It Works Gefen 4x1 Dpkvm SwitcherIntroduction Gefen Operation Notes Features FeaturesPackage Includes Front Panel Front Panel Layout Front Panel Descriptions Input Indicators 1 Back Panel Back Panel Layout Ethernet Back Panel Descriptions Layout and Description IR Remote Control Unit Installing the Battery Corresponding DIP Switch Settings for each IR Channel Setting the IR Channel Ethernet Switching sources using the IR Remote Control Operating the 4X1 Dpkvm SwitcherFront Panel Buttons and LED Indicators Switching sources using the front panel buttons Switching sources using Telnet Switching sources using RS-232 RS-232 Control Serial Port Settings Command Syntax RS-232 Commands#GETPASS Command #IPCONFIG Command #GETUSERNAME Command#RSTIP Command #SETPASS Command #SETHTTPPORT Command#SETTELNETPORT Command #SGATEWAY Command #SETUSERNAME Command #SNETMASK Command #SIPADD Command #ACTIVEBOLO Command #USETELNETPASS Command #IRRMTADD Command #FADEFAULT Function #STBYMODE Command #LOCKPOWER Command Command Description Routing CommandsCommand Gefen Telnet Control #sipadd New IP set to Firmware Update Procedure Firmware Update Installing the Rack Ears Rack EAR Installation Specifications Product Registration Warranty Rev A2 Nordhoff St., Chatsworth CA