Gefen EXT-DPKVM-441 Ethernet, How to Connect the 4x1 DPKVM Switcher, Computer Computer Computer

CONNECTING THE 4X1 DPKVM SWITCHER

How to Connect the 4x1 DPKVM Switcher

1Connect up to four (4) DisplayPort source devices to the DisplayPort inputs on the back panel of the Switcher using DisplayPort cables.

2Connect a DisplayPort-supported display to the DisplayPort output on the back panel of the Switcher.

a OPTIONAL: To use the RS-232 communication feature, connect an RS-232 cable between the Switcher and RS-232 host controller.

b OPTIONAL: To communicate with the Switcher using Telnet, connect an Ethernet cable from the Ethernet jack on the back of the Switcher to the network. See page 24 for more information on using the Telnet feature.

c OPTIONAL: To extend the range of the IR control, connect an IR Extender (Gefen part no. EXT-RMT-EXTIR) to the back of the Switcher.

3Connect the included 5V locking power supply to the power receptacle on the 4x1 DPKVM Switcher

4Connect the opposite end of the power supply to an open wall socket power source.

Wiring Diagram for the 4x1 DPKVM Switcher

Computer

Computer

Computer

MINI STEREO AUDIO CABLE DISPLAYPORT CABLE RS-232 CABLE USB CABLE

ETHERNET

Computer IR Extender

IR

Router

DisplayPort Display

DisplayPort KVM Switcher

USB Mouse

RS-232 Controller USB Keyboard

Powered Speakers

EXT-DPKVM-441

ATTENTION: This product should always be connected to a grounded electrical socket.

11