Routing Commands, Command Description | Gefen EXT-DPKVM-441 instruction

RS-232 COMMANDS

Routing Commands

The following command does not require the ‘#’ character. A carriage return must be added to the end of the command.

Command

R

Description

Routing command

R Command

The R command switches to the speciﬁed input. Syntax:

r param1

Parameters:
param1	DisplayPort Input	[1 - 4]

23

Image 26

Gefen EXT-DPKVM-441 user manual Routing Commands, Command Description

Contents

4x1 Dpkvm Switcher Technical Support Hours Asking for AssistanceTechnical Support Write To Contents Gefen Gefen 4x1 Dpkvm SwitcherIntroduction How It Works Operation Notes Package Includes FeaturesFeatures Front Panel Layout Front Panel Input Indicators 1 Front Panel Descriptions Back Panel Layout Back Panel Back Panel Descriptions Ethernet IR Remote Control Unit Layout and Description Installing the Battery Setting the IR Channel Corresponding DIP Switch Settings for each IR Channel Ethernet Switching sources using the front panel buttons Operating the 4X1 Dpkvm SwitcherFront Panel Buttons and LED Indicators Switching sources using the IR Remote Control Switching sources using RS-232 Switching sources using Telnet Serial Port Settings RS-232 Control #GETPASS Command RS-232 CommandsCommand Syntax #RSTIP Command #GETUSERNAME Command#IPCONFIG Command #SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command #SETUSERNAME Command #SGATEWAY Command #SIPADD Command #SNETMASK Command #USETELNETPASS Command #ACTIVEBOLO Command #FADEFAULT Function #IRRMTADD Command #LOCKPOWER Command #STBYMODE Command Command Routing CommandsCommand Description Telnet Control Gefen #sipadd New IP set to Firmware Update Firmware Update Procedure Rack EAR Installation Installing the Rack Ears Specifications Warranty Product Registration Rev A2 Nordhoff St., Chatsworth CA