Manuals / Gefen / Computer Equipment / Switch

Gefen EXT-DPKVM-441 #SIPADD Command, #SNETMASK Command, RS-232 COMMANDS, #sipadd, #snetmask

Models: EXT-DPKVM-441

1 33

Download 33 pages 17.75 Kb

Page 22

Image 22

RS-232 COMMANDS

#SIPADD Command

The #SIPADD command speciﬁes a new IP address. Dot-decimal notation must be used when specifying the IP address. A reboot is required after the new IP address is set.

Syntax:

#sipadd param1.param2.param3.param4

Parameters:
param1	IP address	[0 - 255]
param2	IP address	[0 - 255]
param3	IP address	[0 - 255]
param4	IP address	[0 - 255]

Example:

#sipadd 192.168.2.240

#SNETMASK Command

The #SNETMASK command speciﬁes a new net mask. Dot-decimal notation must be used when specifying the IP address. A reboot is required after the new IP address is set.

Syntax:

#snetmask param1.param2.param3.param4

Parameters:
param1	IP address	[0 - 255]
param2	IP address	[0 - 255]
param3	IP address	[0 - 255]
param4	IP address	[0 - 255]

Example:

#snetmask 255.255.255.0

Page 22

Image 22

Gefen EXT-DPKVM-441 #SIPADD Command, #SNETMASK Command, RS-232 COMMANDS, #sipadd param1.param2.param3.param4, #snetmask

Contents

4x1 DPKVM Switcher EXT-DPKVM-441 User ManualTechnical Support Hours ASKING FOR ASSISTANCETechnical Support Write ToCONTENTS Gefen The Gefen 4x1 DPKVM SwitcherINTRODUCTION How It WorksREAD THESE NOTES BEFORE INSTALLING OR OPERATION NOTESOPERATING THE 4X1 DPKVM SWITCHER Features FEATURESPackage Includes FRONT PANEL LAYOUT Front Panel4 Power FRONT PANEL DESCRIPTIONS1 Input Indicators 1 2 IRBACK PANEL LAYOUT Back PanelBACK PANEL DESCRIPTIONS Layout and Description IR REMOTE CONTROL UNITIR Remote Control battery as soon as possible Installing the Battery IR REMOTE CONTROL UNITIR REMOTE CONTROL UNIT Setting the IR ChannelCorresponding DIP Switch Settings for each IR Channel Router DisplayPort Display DisplayPort KVM Switcher USB Mouse How to Connect the 4x1 DPKVM SwitcherWiring Diagram for the 4x1 DPKVM Switcher Powered SpeakersSwitching sources using the front panel buttons OPERATING THE 4X1 DPKVM SWITCHERFront Panel Buttons and LED Indicators Switching sources using the IR Remote Controlr Route to Input Switching sources using RS-232Switching sources using Telnet Type Cmd r Route to Input5 4 3 2 Serial Port SettingsRS-232 CONTROL 1 2 3 4#GETPASS Command RS-232 COMMANDSCommand Syntax #sethttpport 80CR#RSTIP Command #GETUSERNAME Command#IPCONFIG Command RS-232 COMMANDS#SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command RS-232 COMMANDS#SGATEWAY Command #SETUSERNAME CommandRS-232 COMMANDS RS-232 COMMANDS #SIPADD Command#SNETMASK Command #sipadd param1.param2.param3.param4RS-232 COMMANDS #USETELNETPASS Command#ACTIVEBOLO Command #usetelnetpass param1RS-232 COMMANDS #FADEFAULT Function#IRRMTADD Command #fadefaultRS-232 COMMANDS #LOCKPOWER Command#STBYMODE Command #lockpower param1R Command Routing CommandsCommand DescriptionTELNET CONTROL TELNET CONTROL IMPORTANT All IP conﬁguration changes will require theFIRMWARE UPDATE Firmware Update ProcedureRACK EAR INSTALLATION Installing the Rack EarsVideo Input Connectors SPECIFICATIONSAudio Input Connectors PRODUCT REGISTRATION WARRANTYunder the Support section of the Gefen Web site Rev A2 This product uses UL listed power supplies20600 Nordhoff St., Chatsworth CA