CONTROLS AND INSTRUMENTS
STEERING
In addition to the steering wheel, the machine has another steering control, the steering selector switch.
B
The steering selector switch (B) is a
The three positions are:
Switch positions are selected and function as follows:
Handle right of center |
| |
Handle directly centered | ENGINE | |
| ||
|
| BLIN |
OBLIQUE (CRAB) | Handle left of center |
|
CAUTION
Before changing steering selections, make sure all four wheels are in line. Failure to align the wheels to the proper settings before changing steering positions may cause haphazard steering. This may result in injury to personnel and/or damage to the machine or property.
BRAKE ON
PUMP OFF
SWAY
CONTROL
LEFTRIGHT
HEADLIGHT HEATER
STABILIZER STABILIZER
TRANSMISSION
The transmission control (C) has one lever that controls both directional and speed requirements. It is located on the left side of the steering column.
To shift into Forward gear gently pull the lever toward you and move the lever upward.
To shift into Neutral move the lever to the center position.
To shift into Reverse gear gently pull the lever toward you and move the lever downward.
To shift into a lower speed rotate the lever clockwise.
To shift into a higher speed rotate the lever
When shifting the transmission from forward to reverse while the machine is in motion the transmission control (C) must be in 1st or 2nd gear only.
Forward / 1st | Low speed/High torque | C | |
Forward / 2nd | Medium speed/Medium torque | ||
| |||
Forward / 3rd | High speed/Low torque |
|
ENGINE
BLIN
BRAKE ON
PUMP OFF
SWAY
CONTROL
LEFTRIGHT
HEADLIGHT HEATER
STABILIZER STABILIZER
3 - 9
