Genie GTH-1056, GTH-1048 manual Placing A Load, Operation, Danger

OPERATION

PLACING A LOAD

A

DANGER

Traveling with a reading of more than 0 degress on the boom angle indicator arrow (A) may cause a rollover hazard.

Gradually move the 4-way controller towards the letter (B) to lift the load vertically. Hold the controller back until the required height has been achieved.

Gradually move the 4-way controller towards the letter (E) to bring the load DOWN and OUT into final position. Lower the load until the weight is completely off the forks.

Gradually move the 4-way controller towards the letter (F) to bring the boom UP and IN. This will bring the forks out of the load. Once the forks are clear of the load the boom can be lowered.

4 - 14