Second Edition • Ninth Printing | Operator's Manual |
|
|
|
|
Emergency Stop
Push in the red Emergency Stop button to the off position at the ground or platform controls to stop all machine functions.
Repair any function that operates when the red Emergency Stop button is pushed in.
Selecting and operating the ground controls will override the platform Red Emergency Stop button.
Auxiliary Controls
Use auxiliary power if the primary power source fails.
1Turn the key switch to ground or platform control.
2Pull out the red Emergency Stop button to the on position.
3Move the lift/drive select switch to the appropriate position (if equipped) when operating the auxiliary controls from the platform.
4Press down the foot switch when operating the auxiliary controls from the platform.
5Simultaneously hold the auxiliary power switch on and activate the desired function.
The boom, steer and drive functions will operate with auxiliary power.
OPERATING INSTRUCTIONS
Operation from Ground
1Turn the key switch to ground control.
2Pull out the red Emergency Stop button to the on position.
3Be sure both battery packs are connected before operating the machine.
To Position Platform
1Hold the function enable switch to either side.
2Move the appropriate toggle switch according to the markings on the control panel.
Drive and steer functions are not available from the ground controls.
Machines equipped with Platform Level Control Disable Function: The platform level toggle switch will not operate when the boom is raised past the drive speed limit switch.
Part No.43654 | Genie | 21 |
