Genie Z-34, Z-22N manual Fall Hazards

Models: Z-34, Z-22N Z-34, Z-22

1 36
Download 36 pages 63.66 Kb
Page 6
Image 6
Fall Hazards

Operator's Manual

Second Edition • Ninth Printing

 

 

 

 

SAFETY RULES

Do not place or attach overhanging loads to any part of this machine.

Do not place ladders or scaffolds in the platform or against any part of this machine.

Do not use the machine on a moving or mobile surface or vehicle.

Be sure all tires are in good condition and lug nuts are properly tightened.

Do not use batteries that weigh less than the original equipment. Batteries are used as counterweight and are critical to machine stability. Each battery must weigh 88 lbs / 40 kg. Each battery box including batteries must weigh a minimum of 452 lbs / 205 kg.

Do not use the machine as a crane.

Do not push the machine or other objects with the boom.

Do not contact adjacent structures with the boom.

Do not tie the boom or platform to adjacent structures.

Do not place loads outside the platform perimeter.

Fall Hazards

Occupants must wear a safety belt or harness and comply with applicable governmental regulations. Attach lanyard to the anchor provided in the platform.

Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.

Do not climb down from the platform when raised.

Keep the platform floor clear of debris.

Lower the platform entry mid-rail or close the entry gate before operating.

4

Genie Z-34/22 & Genie Z-34/22N

Part No.43654

Page 6
Image 6
Genie Z-34, Z-22N manual Fall Hazards