(Not supplied with some versions)

ïCharging connections

qAttach the BC-150 to a flat surface, such as desk or cabin, etc., if desired.

wConnect the AC adapter (BC-147E) as shown below.

eInsert the battery pack with/without the transceiver into the charger.

• The charge indicator lights green.

rCharge the battery pack approx. 8 hours, depending on the re- maining power condition.

CAUTION: DO NOT charge BP-224 more than 12 hours. Otherwise, BP-224 will be damaged. BP-224 must be charged for 8–12 hours only.

IC-M21

BP-224

Charge indicator

Lights green when

BP-224 (with/without

IC-M21) is inserted.

Supplied screws

AC adapter (BC-147E; Not

BATTERY CHARGING 7

Installing batteries in the

battery case

When using a battery case attached to the transceiver, install 6 AA(R6) size alkaline batteries as illustrated below.

qRemove the battery case from the transceiver. w Install 6 AA(R6) size alkaline batteries.

Be sure to observe the correct polarity.

CAUTION:

When installing batteries, make sure they are all the same brand, type and capacity. Also, do not mix new and old batteries together.

Keep battery contacts clean. It’s a good idea to clean bat- tery terminals once a week.

supplied with

BC-150

some versions)

18

Page 23
Image 23
Genius IC-M21 instruction manual Installing batteries Battery case, Charging connections