11 SPECIFICATIONS AND OPTIONS
■Specifications
• GENERAL
Frequency coverage | : Transmit | |
| Receive | |
Mode | : FM (16K0G3E) |
|
Channel spacing | : 25 kHz |
|
Current drain (at 7.5 V DC) | : TX High (5 W) | 1.5 A typical |
| (1 W) | 0.7 A typical |
| Max. audio | 200 mA typical |
| Power save | 20 mA typical |
Frequency stability | : ±1.5 kHz | |
Operating temperature range : |
| |
Dimensions | : 61 (W) ⋅ 135(H) ⋅ 41(D) mm | |
(Projections not included) | 213⁄32(W) ⋅ 55⁄16(H) ⋅ 15⁄8(D) inch | |
Weight (approx.; with | : 360g (12.7 oz) |
|
• TRANSMITTER
Output power (at 7.5 V DC) | : 5 | W (Hi), 3 W (Mid), 1 W (Low) or |
| 1 | W (Hi), 0.5 W (Low) <(#07)FRG> |
Modulation system | : Variable reactance frequency modulation | |
Max. frequency deviation | : ±5 kHz | |
Audio harmonics distortion | : Less than 10 % (at 60 % mod.) | |
Spurious emissions | : Less than 0.25 µW |
• RECEIVER
Receive system | : |
Sensitivity (20 dB SINAD) | : Less than |
Squelch sensitivity (at threshold) : Less than 0 dBµ EMF (typical) | |
Intermodulation rejection ratio : 68 dB | |
Spurious response rejection ratio : 70 dB | |
Adjacent channel selectivity | : 70 dB |
Hum and noise ratio | : More than 40 dB |
Audio output power | : 0.2 W typical at 10% distortion with an |
| 8 Ω load |
All stated specifications are subject to change without notice or obligation.
■Options
DBATTERY CASE AND PACK
•
Battery case for 6 ⋅ AA (R6) alkaline cells. The same as supplied with the transceiver depending on versions.
•
7.2V/750 mAh
DCHARGERS
•
For rapid charging of battery packs. An AC adapter is supplied with the charger. Charging time: approx. 1.5 to 2 hours
•
For rapid charging of up to 6 battery packs (six
•
Used for regular charging of battery pack. The same as supplied with the transceiver. Charging time: approx. 8 hours
DBELT CLIPS
•
Universal belt clip for attaching to your belt.
•
Exclusive
•
Belt clip for swivel type. The same as supplied with the transceiver.
25