Chapter 7: Accessorizing and Modifying your Filtered Enclosure
2.Guardian™ 1000 Digital Airflow Monitor or Guardian™ LED Airflow Monitor
The Guardian Digital 1000 Airflow Monitor or Guardian LED Airflow Monitor allows you to continuously monitor airflow through the enclosure. Either monitor is usually provided with the XPert enclosures.
Description | Order Part #’s | Individual Parts Required | |
Guardian Airflow Monitor |
|
| |
115V or 230V |
|
|
|
1 ea. | 3811500 | Airflow Monitor Printed Circuit Board | |
1 ea. | 3910700 | Airflow Sensor w/ Connector | |
2 ea. | 1885405 | ||
|
| mount Airflow Monitor Circuit Board | |
|
|
| |
2 ea. | 1891808 | ||
|
| mount Airflow Sensor | |
|
|
| |
|
|
| |
Guardian Digital 1000 |
|
| |
Airflow Monitor |
|
| |
115V | 1 ea. | 3908500 | 115V Guardian Digital Monitor, Airflow |
|
| Sensor, Sensor Cable, and 15 VDC power | |
|
|
| supply |
230V | 1 ea. | 3908501 | 230V Guardian Digital Monitor, Airflow |
|
| Sensor, Sensor Cable, and 15 VDC power | |
|
|
| supply |
Add appropriate Front Panel with cutout to mount Digital | |||
1000 Airflow Monitor |
| ||
1 ea. | 3904803 | 2' Front Panel w/ cutout | |
or |
|
|
|
1 ea. | 3904804 | 3' Front Panel w/ cutout | |
or |
|
|
|
1 ea. | 3904805 | 4' Front Panel w/ cutout | |
NOTE: The cutout can also be made with a reciprocating saw and a 1/8" diameter bit. The centerline of the cutout is located 3.3" from the left side and 4.2" from the bottom. The 1/8" mounting holes are spaced 4.38" apart top to bottom and centered over the cutout. The cutout dimensions are 2.43" wide by 4.13" tall.
3.Exhaust Transition Kits for Ducting to Outside
Exhaust transition connects to the XPert Filtered Balance System with integral motorized impellers from the top so the duct can be routed up and outside the building. The transition is available for 6" PVC duct. The transition should be sealed to the top of the enclosure with silicone sealant to prevent leaks. See Figure
64
