Giantec tracer2000 manual Integrated Peripherals, Spp

tracer2000 Network DVR Hardware User’s Manual

2.4Integrated Peripherals

Use this menu to specify your setting for integrated peripherals.

OnChip Primary PCI IDE	Enabled	Item Help
OnChip Secondary PCI IDE	Enabled
IDE Primary Master PIO	Auto	Menu Level ¾
IDE Primary Slave PIO	Auto	If your IDE hard drive supports
IDE Secondary Master PIO	Auto
		block mode select Enabled for
IDE Secondary Slave PIO	Auto
		automatic detection of the optimal
IDE Primary Master UDMA	Auto
		number of block read / write per
IDE Primary Slave UDMA	Auto
		sector the drive can support.
IDE Secondary Master UDMA	Auto
IDE Secondary Slave UDMA	Auto
USB Controller	Enabled
USB Keyboard Support	Enabled
USB Mouse Support	Disabled
Init Display	Onboard / AGP
AC97 Audio	Auto
IDE HDD Block Mode	Enabled
Power On Function	Button Only
xKB Power On Password	Enter
xHot Key Power On	Ctrl-F1
Onboard Serial Port 1	3F8 / IRQ4
Onboard Serial Port 2	2F8 / IRQ3
UART Mode Select	Normal
xRxD, TxD Active	Hi, Lo
xIR Transmission Delay	Enabled
xUR2 Duplex Mode	Half
xUse IR Pins	IR-Rx2Tx2
Onboard Parallel Port	378 / IRQ7
Parallel Port Mode	SPP
EPP Mode Select	EPP1.7
ECP Mode Use DMA	3
PWRON After PWR-Fail	Off
Watch Dog Timer Select	Disable
↑↓←→Move	Enter: Select		+/-/PU/PD: Value
F10: Save	ESC: Exit		F1: General Help
F5: Previous Values	F6: Fail-safe Defaults		F7: Optimized Defaults

Version 3.1 Page 24 of 31