tracer2000 Network DVR Hardware User’s Manual
Chapter I | Introduction |
Thank you for purchasing tracer2000 DVR; this manual will guide you through the setup, installation, and use of all our tracer2000 systems.
Before proceeding, please read this manual thoroughly!
If you have any questions or concerns that cannot be solved by following this manual, please visit our web site at http://www.giantec.net or for technical issue please contact to our technical support center at service@giantec.com.tw.
Limited Warranty
Giantec Inc. warrants this product to be in compliance with its own plans and specifications. Moreover, to be free from defects in materials and workmanship under normal use and service for all parts one year after the original purchase date. During this period Giantec Inc. will replace parts at no charge, however, labor cost will be laid after one year. Please contact your dealer / distributor for details.
This warranty excludes damages due to misuse or neglect. Also this warranty does not cover damages beyond DVR’s control. In no event shall Giantec Inc. be liable for any direct, indirect or consequential damages; loss of anticipated profits, loss of time or any other losses incurred by the buyer in connection with the purchase, installation, operation or failure of this product. For more details on the limitation of this warranty, contact your distributor.
Function Introduction
Thank you for using tracer2000 video surveillance system. tracer can be used to transfer captured video signal from analog to digital using the compression format for record and play. They can also capture videos of up to 4 / 8 / 16 cameras for model tracer2404, tracer2408 and trcer2416 (4 / 8 / 16 BNC inputs) with 4 audio sources at the same time. The
Version 3.1 | Page 1 of 31 |
