Giantec tracer2000 manual Frequency / Voltage Control, Load Optimized Defaults, Save & Exit Setup

tracer2000 Network DVR Hardware User’s Manual

2.8Frequency / Voltage Control

Use this menu to specify your settings for frequency / voltage control.

Auto Detect DIMM / PCI CLK	Enabled
Spread Spectrum	Disabled

Item Help

Menu Level ¾

↑↓←→Move	Enter: Select	+/-/PU/PD: Value
F10: Save	ESC: Exit	F1: General Help
F5: Previous Values	F6: Fail-safe Defaults	F7: Optimized Defaults

2.9Load Optimized Defaults

Use this menu to load the BIOS default values that are factory settings for optimal performance system operations. While Award has designed the custom BIOS to maximize performance, the factory has the right to change these defaults to meet their needs.

Load Optimized Defaults (Y/N)? N

Pressing “Y” loads the default values that are factory settings for optimal performance system operations.

2.10Supervisor / User Password

Use this menu to set User and Supervisor Passwords.

2.11Save & Exit Setup

Save CMOS value changes to CMOS and exit setup.

2.12Exit Without Save

Abandon all CMOS value changes and exit setup.

Version 3.1 Page 27 of 31