
English
Standard CMOS Features |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) | Thu, Jan 20 2005 | Item Help | |||
| Time (hh:mm:ss) |
| 22:31:24 |
| Menu Level` | |
` IDE Channel 0 Master | [None] |
| Change the day, month, | |||
` IDE Channel 0 Slave | [None] |
| year |
| ||
` IDE Channel 1 Master | [None] |
|
|
| ||
` IDE Channel 1 Slave | [None] |
| <Week> |
| ||
` IDE Channel 2 Master | [None] |
| Sun. to Sat. | |||
` IDE Channel 3 Master | [None] |
| <Month> | |||
|
|
|
|
| ||
| Drive A |
| [1.44M, 3.5"] | Jan. to Dec. | ||
| Drive B |
| [None] |
|
|
|
| Floppy 3 Mode Suport | [Disabled] |
| <Day> |
| |
|
|
|
|
| 1 to 31 (or maximum | |
| Halt On |
| [All, But Keyboard] | allowed in the month) | ||
| Base Memory |
| 640K |
| <Year> |
|
| Extended Memory | 239M |
| 1999 to 2098 | ||
| Total Memory |
| 240M |
|
|
|
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
| Date |
|
|
|
|
|
| The date format is <week>, <month>, <day>, <year>. |
|
|
| ||
| Week | The week, from Sun. to Sat., determined by the BIOS and is display only | ||||
| Month | The month, Jan. Through Dec. |
|
|
| |
| Day | The day, from 1 to 31 (or the maximum allowed in the month) |
| |||
| Year | The year, from 1999 through 2098 |
|
|
|
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave / IDE Channel 2, 3 Master
IDE HDD
IDE Device Setup. You can use one of three methods:
• Auto | Allows BIOS to automatically detect IDE devices during POST(default) |
• None | Select this if no IDE devices are used and the system will skip the automatic |
| detection step and allow for faster system start up. |
• Manual | User can manually input the correct settings. |
Access Mode | Use this to set the access mode for the hard drive. The four options are: |
| CHS/LBA/Large/Auto(default:Auto) |
Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.
Cylinder | Number of cylinders |
Head | Number of heads |
Precomp | Write precomp |
Landing Zone | Landing zone |
Sector | Number of sectors |
If a hard disk has not been installed, select NONE and press <Enter>.
- 32 - |