English
There are three major areas in the RAID BIOS setup screen: Main Menu, Drive Select Menu and RAID Array List. (as Figure below)
Main Menu
| RAID BIOS Setup Utility (c) 2004 ALi Corporation | www.ali.com.tw | |||||
| |||||||
Create RAID 0 Striping | for Performance |
|
|
|
|
| |
Create RAID 1 Mirroring for Reliability |
|
|
|
|
| ||
Create JBOD for integrated Capacity |
| SPACE : | Select |
| |||
Stripe Size | 64K |
| |||||
Delete RAID Settings & Partition |
| , | : | Moving Cursor | |||
Delete All RAID Settings & Partition |
| Enter | : | Select & Finish | |||
Rebuild RAIDArray |
| ESC | : | Exit |
| ||
Channel 1 Master : | Drive Model |
| Mode | 1 | Capacity |
| RAIDArray/Type |
ST3120026AS |
| SATA | 120034 MB |
| |||
Channel 2 Master : ST3120026AS |
| SATA 1 | 120034 MB |
| |||
| Capacity | RAID Type | Stripe Size | RAID Name |
RAID Array A | : |
|
|
|
RAID Array B | : |
|
|
|
RAID Array C | : |
|
|
|
RAID Array List | Drive Select Menu |
1. Create RAID 0 Striping for Performance
Press Enter on Create RAID 0 Striping for Performance item. An "S" flash cursor appears at the Drive Select Menu for the user to choose the first drive for RAID 0. Use Space key to select the desired drive for RAID 0. Then the flash cursor changes to an "s" flash cursor for the user to choose the second drive for RAID 0. (as Figure below)
|
| RAID BIOS Setup Utility (c) 2004 ALi Corporation | www.ali.com.tw | ||||||||
| Create RAID 0 Striping | for Performance |
|
|
|
|
|
|
| ||
| Create RAID 1 Mirroring for Reliability |
|
|
|
|
|
|
| |||
| Create JBOD for integrated Capacity |
|
|
| SPACE : | Select |
| ||||
| Stripe Size |
|
|
| 64K |
|
|
| |||
| Delete RAID Settings & Partition |
|
| , | : | Moving Cursor | |||||
| Delete All RAID Settings & Partition |
|
|
| Enter | : | Select & Finish | ||||
| Rebuild RAIDArray |
|
|
| ESC | : | Exit |
| |||
| Select Stripe Drives |
|
|
|
|
|
|
| |||
|
|
|
| Drive Model |
| Mode |
| Capacity | RAIDArray/Type | ||
| S Channel 1 Master : | ST3120026AS |
| SATA | 1 | 120034 MB |
| ||||
| s Channel 2 Master : ST3120026AS |
| SATA 1 | 120034 MB |
| ||||||
| RAID Array A | : |
| Capacity |
| RAID Type | Stripe Size | RAID Name | |||
|
|
|
|
|
|
|
|
|
| ||
| RAID Array B | : |
|
|
|
|
|
|
|
|
|
| RAID Array C | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press Space key to select the second drive. The prompt "Data on RAID Drives will be deleted (Y/N)?" appears after two drives are properly assigned. Press Y, and then some necessary information will be written to the drives, which will destroy the original data in the drives.
Make sure the data in drives is no longer in use before creating RAID 0.
- 66 - |
