UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal | Set onboard I/O chip UART to normal mode. (Default value) |
IrDA | Set onboard I/O chip UART to IrDA mode. |
ASKIR | Set onboard I/O chip UART to ASKIR mode. |
UR2 Duplex Mode
This feature allows you to seclect IR mode.
This function will available when "UART Mode Select" doesn't set at Normal.
Half | IR Function Duplex Half. (Default value) |
Full | IR Function Duplex Full. |
Onboard Parallel port
Disabled | Disable onboard LPT port. |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
Parallel Port Mode
SPP | Using Parallel port as Standard Parallel Port. |
EPP1.9+SPP | Using Parallel port as Enhanced Parallel Port 1.9 and SPP mode. |
ECP | Using Parallel port as Extended Capabilities Port. |
EPP1.9+ECP | Using Parallel port as Enhanced Parallel Port 1.9 and ECP mode. |
PRINTER | Using Parallel port as printer port. (Default value) |
EPP1.7+SPP | Using Parallel port as Enhanced Parallel Port 1.7 and SPP mode. |
EPP1.7+ECP | Using Parallel port as Enhanced Parallel Port 1.7 and ECP mode. |
Game Port Address
Disabled | Disable this function. |
201 | Set Game Port Address to 201. (Default value) |
209 | Set Game Port Address to 209. |
Midi Port Address (Note)
Disabled | Disable this function. (Default value) |
330 | Set Midi Port Address to 330. |
300 | Set Midi Port Address to 300. |
Midi Port IRQ
10 | Set Midi Port IRQ to 10. (Default value) |
5 | Set Midi Port IRQ to 5. |
(Note) If you want to use a force feedback joystick, set Midi Port Address to 330 or 300.
English
- 37 - | BIOS Setup |
