After the RAID array has been created successfully, its information shows up at RAID Array List.
|
|
| RAID BIOS Setup Utility (c) 2004 ALi Corporation | www.ali.com.tw | ||||||||
| Create RAID 0 Striping | for Performance |
|
|
|
|
|
|
| |||
| Create RAID 1 Mirroring for Reliability |
|
|
|
|
|
|
| ||||
| Create JBOD for integrated Capacity |
|
|
| SPACE : | Select |
| |||||
| Stripe Size |
|
|
|
| 64K |
|
|
| |||
| Delete RAID Settings & Partition |
|
| , | : | Moving Cursor | ||||||
| Delete All RAID Settings & Partition |
|
|
| Enter | : | Select & Finish | |||||
| Rebuild RAIDArray |
|
|
|
|
|
| ESC | : | Exit |
| |
|
|
|
|
| Drive Model |
| Mode |
| Capacity | RAIDArray/Type | ||
| Channel 1 Master : | ST3120026AS |
| SATA | 1 | 120034 MB |
| |||||
| Channel 2 Master : ST3120026AS |
| SATA 1 | 120034 MB |
| |||||||
|
|
|
|
| Capacity |
| RAID Type | Stripe Size | RAID Name | |||
| RAID Array A | : |
|
| 120034 MB |
| 1 |
|
|
| ALi_RAID | |
| RAID Array B | : |
|
|
|
|
|
|
|
|
|
|
| RAID Array C | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Create JBOD for integrated Capacity
Press Enter on Create JBOD for integrated Capacity item. A "J" flash cursor appears at the Drive Select Menu for the user to choose the first drive for JBOD. Use Space key to select the desired drive for JBOD. Press Enter to finish JBOD drive selection. The maximum number of drives for JBOD array is four and the minimum is two.
|
| RAID BIOS Setup Utility (c) 2004 ALi Corporation | www.ali.com.tw | ||||||||
| Create RAID 0 Striping | for Performance |
|
|
|
|
|
|
| ||
| Create RAID 1 Mirroring for Reliability |
|
|
|
|
|
|
| |||
| Create JBOD for integrated Capacity |
|
|
| SPACE : | Select |
| ||||
| Stripe Size |
|
|
| 64K |
|
|
| |||
| Delete RAID Settings & Partition |
|
| , | : | Moving Cursor | |||||
| Delete All RAID Settings & Partition |
|
|
| Enter | : | Select & Finish | ||||
| Rebuild RAIDArray |
|
|
| ESC | : | Exit |
| |||
| Select JBOD Drives |
|
|
|
|
|
|
| |||
|
|
|
| Drive Model |
| Mode |
| Capacity | RAIDArray/Type | ||
| J Channel 1 Master : | ST3120026AS |
| SATA | 1 | 120034 MB |
| ||||
| J Channel 2 Master : ST3120026AS |
| SATA 1 | 120034 MB |
| ||||||
| RAID Array A | : |
| Capacity |
| RAID Type | Stripe Size | RAID Name | |||
|
|
|
|
|
|
|
|
|
| ||
| RAID Array B | : |
|
|
|
|
|
|
|
|
|
| RAID Array C | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The prompt "Data on RAID Drives will be deleted (Y/N)?" appears after two drives are properly assigned. Press Y, and then some necessary information will be written to the drives, which will destroy the original data in the drives. Next, the Array Name input line appears for the user to key in a name for the newly created array. The effective characters for an array name is
Make sure the data in drives is no longer in use before creating JBOD.
English
- 69 - | Appendix |
