English
2. Create RAID 1 Mirroring for Reliability
Press Enter on Create RAID 1 Mirroring for Reliability item. An "M" flash cursor appears at the Drive Select Menu for the user to choose the first(source) drive for RAID 1. Use Space key to select the desired drive for RAID 1. Then the flash cursor changes to an "m" flash cursor for the user to choose the second (target) drive for RAID 1. (as Figure below)
|
| RAID BIOS Setup Utility (c) 2004 ALi Corporation | www.ali.com.tw | ||||||||
| Create RAID 0 Striping | for Performance |
|
|
|
|
|
|
| ||
| Create RAID 1 Mirroring for Reliability |
|
|
|
|
|
|
| |||
| Create JBOD for integrated Capacity |
|
|
| SPACE : | Select |
| ||||
| Stripe Size |
|
|
| 64K |
|
|
| |||
| Delete RAID Settings & Partition |
|
| , | : | Moving Cursor | |||||
| Delete All RAID Settings & Partition |
|
|
| Enter | : | Select & Finish | ||||
| Rebuild RAIDArray |
|
|
| ESC | : | Exit |
| |||
| Select Stripe Drives |
|
|
|
|
|
|
| |||
|
|
|
| Drive Model |
| Mode |
| Capacity | RAIDArray/Type | ||
| M Channel 1 Master : | ST3120026AS |
| SATA | 1 | 120034 MB |
| ||||
| mChannel 2 Master : ST3120026AS |
| SATA 1 | 120034 MB |
| ||||||
| RAID Array A | : |
| Capacity |
| RAID Type | Stripe Size | RAID Name | |||
|
|
|
|
|
|
|
|
|
| ||
| RAID Array B | : |
|
|
|
|
|
|
|
|
|
| RAID Array C | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press Space key to select the second drive. The prompt "Create RAID 1 (Y/N)?" appears after two drives are properly assigned. Press Y, and then some necessary information will be written to the drives, which will destroy the original data in the drives.
It is recommended to use new drives to create RAID 1. If existing drive is to be used, backup all necessary data before creating RAID 1.
Next, the Array Name input line appears for the user to key in a name for the newly created array. The effective characters for an array name is
Lastly a prompt message "Duplicate Data from M to m (Y/N)?" asks whether to do drive copy. The source and target drives are indicated by "M" and "m" in Drive Select Menu respectively. Pressing Y will duplicate the data in source drive to the target drive. Make sure the source drive is the correct one. If you press N, then the data is inconsistent in two drives.
|
| RAID BIOS Setup Utility (c) 2004 ALi Corporation | www.ali.com.tw | ||||||||
| Create RAID 0 Striping | for Performance |
|
|
|
|
|
|
| ||
| Create RAID 1 Mirroring for Reliability |
|
|
|
|
|
|
| |||
| Create JBOD for integrated Capacity |
|
|
| SPACE : | Select |
| ||||
| Stripe Size |
|
|
| 64K |
|
|
| |||
| Delete RAID Settings & Partition |
|
| , | : | Moving Cursor | |||||
| Delete All RAID Settings & Partition |
|
|
| Enter | : | Select & Finish | ||||
| Rebuild RAIDArray |
|
|
| ESC | : | Exit |
| |||
| Duplicate Data from M to m (Y/N) ? |
|
|
|
|
|
|
| |||
|
|
|
| Drive Model |
| Mode |
| Capacity | RAIDArray/Type | ||
| M Channel 1 Master : | ST3120026AS |
| SATA | 1 | 120034 MB |
| ||||
| mChannel 2 Master : ST3120026AS |
| SATA 1 | 120034 MB |
| ||||||
| RAID Array A | : |
| Capacity |
| RAID Type | Stripe Size | RAID Name | |||
|
|
|
|
|
|
|
|
|
| ||
| RAID Array B | : |
|
|
|
|
|
|
|
|
|
| RAID Array C | : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- 68 - |
