Gigabyte GN-BTD01 manual Troubleshooting, Q1 Can’t connect to a paired device?

GN-BTD01 Bluetooth User’s Guide

7 Troubleshooting

Q1: Can’t connect to a paired device?

-Check the remote paired device is within radio range and powered up and then attempt the connection again.

Q2: Can’t discover services on an un-paired remote device?

-Verify that remote device is powered up and in Connectable mode (Bluetooth Configuration panel \ Accessibility tab). Click the “Search For Devices” to verify that the device is within range.

Q3. Dial-up Networking service does not start?

-Please check the modem is usable as a local device from the server. Open the “Bluetooth Configuration panel \ Local Services” tab then double-click the “Dial-up Networking” service. Select the one modem that will be used to dial out. Click the OK button to close the dialog box. Click OK button in the Bluetooth Configuration panel to activate the setting.

Q4. How do I decide the Bluetooth Device Address (BDA) of my device?

-Open the “Bluetooth Configuration panel \ Hardware” tab. The Bluetooth Device Address will be displayed in the Device Properties section of the dialog box.

Q5. How do I decide the version number of the Bluetooth Specification that the Host Controller Interface (HCI) complies with?

-Open the “Bluetooth Configuration panel \ Hardware” tab. The Bluetooth Specification compliance and the Specification Revision information for the Host Controller Interface will be displayed in the Device Properties section of the dialog box.

Q6. How do I decide the version number of the link Manager Protocol (LMP)?

-Open the “Bluetooth Configuration panel \ Hardware” tab. The Link Manager Protocol version number and the sub-version number information will be displayed in the Device Properties section of the

22