to an access point. Open and shared authentication do not rely on a RADIUS server on your network.
Preferred Access Points
If this profile is configured for use in an infrastructure network and you want to specify up to four access points to which the client adapter should attempt to associate, click Preferred APs. The Preferred Access Points window appears
Figure 3-14. Preferred Access Points Window
Leave the Access Point 1 through Access Point 4 fields blank or enter the MAC addresses of up to four preferred access points to which the client adapter can associate; then click OK. (The MAC address should consist of 12 hexadecimal characters.) If the specified access points are not found or the client adapter roams out of range, the adapter may associate to another access point.
Go to the next section to set additional parameters or click OK to save your changes and return to the Profile Management window.
25
