Gigabyte GA-8ILFT Floppy 3 Mode Support for Japan Area, Halton, BaseMemory, ExtendedMemory

CFloppy 3 Mode Support (for Japan Area)

8Disabled	Normal Floppy Drive. (Default value)
8Drive A	Drive A is 3 mode Floppy Drive.
8Drive B	Drive B is 3 mode Floppy Drive.
8Both	Drive A & B are 3 m ode Floppy Drives.

CHalton

The category determines whether the computer will stop if an error is detectedduring power up.

8NO Errors	The system boot will not stop for any error that may be detected
	and you will be prompted.
8All Errors	Whenever the BIOS detects a non-fatal error the system will be stopped.
8All, But Keyboard	The system boot will not stop for a keyboard error; it will stop for
	all other errors. (Default value)
8All, But Diskette	The system boot will not stop for a disk error; it will stop for all
	other errors.
8All, But Disk/Key	The system boot will not stop for a keyboard or disk error; it will
	stop for all other errors.

E

CMemory

The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

BaseMemory

The POST of the BIOS will determine the amount of base (or conventional) memory installed inthe system.

The value of the base memory is typically 512 K for systems with 512 K memory installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.

ExtendedMemory

The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU’s memory address map.

n

- 27 - BIOS Setup