Glen Dimplex Home Appliances Ltd GT 756, GT 755 manual Fixing, Base, carpet or soft flooring

Models: GT 756 GT 755

1 24
Download 24 pages 23.91 Kb
Page 5
Image 5
Space for THIS APPLIANCE MUST NOT BE INSTALLED ON A NON-FIXED RAISED

Space for THIS APPLIANCE MUST NOT BE INSTALLED ON A NON-FIXED RAISED

Fixing

BASE.

 

To ensure that critical air gaps are maintained under the product, we recommend

 

that this product is mounted on a solid base and that the feet do not sink into any

 

carpet or soft flooring.

 

The cooker is designed to slot between standard kitchen units spaced a

 

minimum 500mm apart. The clearance either side need only be sufficient to

 

allow the cooker to be withdrawn for servicing.

 

It can be used with cabinets on either side but for a minimum distance of 400mm

 

above hotplate level allow a side clearance of 60mm between the appliance

 

and any wall, partition or tall cupboard. It can also be used in a free standing

 

position.

 

Allow a minimum distance of 750mm from the hob surface to the underside of

 

any overhead combustible surface such as overhanging cabinets.

 

Your cooker is heavy, so be careful when moving or positioning it. Do not try

 

to move the cooker by pulling on the doors or handles.

 

To avoid damage to surrounding units a 10mm gap should be left between

 

the appliance and the units. If this is not possible, a kit (part number 01 25552 00)

 

may be ordered from Customer Care which will protect the units.

 

For models with side opening doors, we recommend a side clearance of 60mm

 

between the cooker and any side wall to allow the door to be opened fully.

 

Whatever the position, remember to leave enough room for the cooker to be

 

pulled out for cleaning and service.

 

Movement of your cooker is most easily achieved by lifting the front as follows

 

and pulling forwards. Open the Grill door and the Conventional Oven door

 

sufficiently to allow a comfortable grip on the underside front edge of the oven

 

roofs, avoiding any grill elements or oven interior furniture. Take care not to

 

damage any floor coverings.

 

If a cooker hood is to be fitted, refer to the manufacturer's instructions regarding

 

fixing height.

r=

65 mm Min

o.

750 mm Min

_ 500 mm Mm

_ 65 mm Min

WARNING

The use of a gas cooker results in the production of heat and moisture in the room in which

it is installed. Ensure that the kitchen is well ventilated; keep natural ventilation holes or install

 

 

a mechanical ventilation device (mechanical cooker hood)

 

Prolonged intensive use of the appliance may call for additional ventilation, for example

 

opening of a window, or more effective ventilation, for example increasing the level of mechanical

 

ventilation where present.

Connecting to This appliance is designed not to project in front of standard 600mm

5

Page 5
Image 5
Glen Dimplex Home Appliances Ltd GT 756 Space for THIS APPLIANCE MUST NOT BE INSTALLED ON A NON-FIXED RAISED, Fixing, Base