GN Netcom 5830 Intercom Operation, Blind Call Transfer, Announced Call Transfer, From the Handset

5830_CIB_1ATT 8/14/02 9:47 PM Page 35

Blind Call Transfer

If you have installed additional AT&T 5800 handsets (purchased separately) with your 5830 telephone, you can transfer a call from one handset to another.

From the Handset

		1	Press	XFER , then use	to highlight
			were you want the call transferred.
		2	Press	OK when the desired destination
k	i	o 3	is highlighted.
			Press Oor place the handset in the charger

j p to complete the transfer.

From the Base

1Press I.

j	2	Press the number of the handset where you
		want the call transferred (for example, 2).
	¥NOTE: An unanswered call will ring back to the
	originating handset or base if not answered in
	30 seconds.
	Announced Call Transfer
	1	Press	HOLD	to put the call on hold.
	2	Press	MENU	, then use	to highlight
		INTERCOM.
	3	Press	OK	, then use	to highlight
	j	the call destination, then press			OK again.

4When the handset or base answers, announce the caller.

5Press Oon the handset or Kon

the base to end the call.

6Press P(on the receiving handset) or

Kon the base to pick up the call on hold.

j

INTERCOM OPERATION

35