Initial Setup (Continued)
Country Code
Enter the 2-letter code for the country/area whose stan-
dards were used to rate your DVDs, referring to the
“Country Code List” on page 54.
11
Press SETUP.
The Setup menu appears.
22
Use v/ Vto select the Lock option.
33
While the Lock option is selected, press Bto
move to the second level.
44
Use v/ Vto select the Country Code option.
55
Press Bto move to the third level.
66
When you have not entered a password yet.
Enter a 4-digit password using the 0-9 buttons.
Enter the 4-digit password again to confirm.
When you have already entered a password;
Enter your 4-digit password using the 0-9 buttons.
ip
If you a mistake before pressing ENTER, press bto
back up and then re-enter your password.
77
Select the first character using the v/ V
buttons.
88
Shift the cursor using the Bbutton and select
the second character using the v/ Vbuttons.
99
Press ENTER to confirm your Country Code
selection, then press SETUP to exit the menu.
RECORD Settings
DISC Record Mode
You can set the default DVDrecording quality to: SP
(Standard, 2 hrs/disc), LP (Low, 4 hrs/disc), or XP
(High, 1 hr/disc).
11
Press SETUP.
The Setup menu appears.
22
Use v/ Vto select the Record option.
33
While the Record option is selected, press Bto
move to the second level.
44
Use v/ Vto select the DISC Record Mode
option.
55
Press Bto move to the third level.
66
Use b/ Bto select Video Mode or VR Mode.
77
Use v/ Vto select the desired DISC Record
Mode (SP, LP, or XP).
88
Press ENTER to confirm your selection, then
press SETUP to exit the menu.
VCR Record Mode
You can set the default VCR recording quality to SP
(Standard Play) or SLP (Super Long Play). SPis higher
quality, but SLPprovides 3 times the recording time;
e.g., a 2 hour tape will record for 6 hours in SLP mode.
CONNECTIONS & SETUP
23
Movie Rating
Password
Country Code
US
Prev. Select
Video Mode
VR Mode
SP
SP
DISC Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
SLP
SP
DISC Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
Prev. Select