![](/images/new-backgrounds/1177955/17795527x1.webp)
Installation
Installation
Do not install or service this equipment unless you are trained and qualified.
Do not install the ProDispense controller, fluid panels, or remote operator station in a hazardous location.
•FIG. 5 is not an actual system design. Contact your Graco distributor for assistance in designing your system.
•See detailed installation instructions, beginning on page 18.
•Be sure all accessories are adequately sized and pressure rated to meet the system requirements.
•Be sure mounted surfaces and fasteners can support the weight of the equipment; hose, tubing and cable attachments; and fluid.
Key for FIG. 5
1ProDispense Controller with EasyKey™ Pad
2Remote Operator Station
3Oil/Lubricant Fluid Panel (244599)
4Water/Antifreeze Fluid Panel (244600)
5Grease/Paint Fluid Panel (244601)
6Fluid Supply Pump
7Fluid Supply
8Air Supply Line
9Dispense Valve
10Ground Wire to true earth ground
11Fluid Supply Line
12Fluid Dispense Line
13Fluid Shutoff Valve
14
15Optional Printer
14 | 309301G |