WARNING

WARNING

FIRE, EXPLOSION, AND ELECTRIC SHOCK HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in fire, explosion or electric shock.

•Installation and service of electrical components must be completed by a qualified electrician.

•Do not install the ProDispense controller, fluid panels, or remote operator station in a hazardous location.

•Ground the equipment. See Ground the System, page 20.

•If there is any static sparking while using equipment, stop dispensing immediately. Identify and correct the problem.

•Provide fresh air ventilation to avoid buildup of flammable fumes.

•Eliminate all ignition sources, such as cigarettes.

•Avoid spilling fluids onto electrical components.

•Turn off the ProDispense controller power switch before servicing equipment.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

•Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

•Know the specific hazards of the fluid you are using.

•Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

•This equipment is for professional use only.

•Read all instruction manuals, tags, and labels before operating the equipment.

•Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

•Do not alter or modify this equipment.

•Check equipment daily. Repair or replace worn or damaged parts immediately.

•Do not exceed the maximum working pressure stated on the equipment or in the Technical Data, page 71.

•Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Techni- cal Data in all equipment manuals and the fluid manufacturer warnings.

•Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180° F (82° C) or below -40° F (-40° C).

•Comply with all applicable local, state, and national fire, electrical, and safety regulations.

6

309301G

Page 5 Page 7
Page 6
Image 6
Graco 244561 important safety instructions FIRE, EXPLOSION, and Electric Shock Hazard
Page 5 Page 7

244561 specifications

The Graco 244561 is a highly regarded airless paint sprayer designed for both professional contractors and DIY enthusiasts. It is particularly known for its efficiency and versatility, making it suitable for a wide range of painting projects. This model offers several features that stand out in its class, ensuring that users achieve a high-quality finish with minimal effort.

One of the main features of the Graco 244561 is its powerful motor, which delivers consistent pressure for a smooth and even paint application. With a flow rate that can handle up to 0.42 gallons per minute, this sprayer is capable of quickly covering large areas, making it ideal for both interior and exterior projects. The robust design allows for the use of various paint types, including latex and oil-based finishes, giving users flexibility in their material choices.

The Graco 244561 also incorporates advanced technologies aimed at enhancing user experience and improving results. One of these is the Reverse-A-Clean feature, which enables users to easily clear clogs by reversing the flow of paint through the spray tip. This saves time and frustration, allowing users to get back to painting quickly. Additionally, the SmartControl technology ensures a consistent spray pattern at any pressure level, providing control over the finish and ensuring professional quality results.

The sprayer comes with a variety of accessories, including a spray tip that allows for different spray patterns and sizes. This ensures versatility in application, whether you are working on cabinets, walls, fences, or outdoor furniture. The adjustable pressure control also allows users to customize their spray settings based on the project, making it easier to work on intricate details or larger surfaces.

Durability is another key characteristic of the Graco 244561. Built with high-quality materials, this sprayer is designed to withstand the rigors of regular use in various environments. The compact and lightweight design also enhances portability, making it easy to transport from one job site to another.

In conclusion, the Graco 244561 airless paint sprayer is a powerful and versatile tool that caters to a wide array of painting needs. With its efficient motor, innovative technologies, and durable design, it promises excellent performance and reliability for both professionals and DIYers alike. Whether tackling a small home improvement project or a larger commercial job, the Graco 244561 stands out as a reliable choice that combines quality with user-friendliness.
Top Page Image Contents