Operation - Repair - Parts
Cordless Hand-Held Paint Sprayers | 3A2589D |
| | EN |
| |
- For portable spray applications of architectural paints and coatings only -
- Not approved for use in explosive atmosphere locations -
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and instructions in this manual. Save these instructions.
All Models:
Maximum Working Pressure 2000 psi (14 MPa, 138 bar)
Model | Charger | | |
Voltage | | |
| | |
| | | |
| | | |
| | | |
| | | |
16N657 | 120V | |
| | | |
16M886 | 120V | |
| | | |
16N660 | 120V | |
| | | |
24R747 | 120V | |
WARNING
Use only water-based or oil-based (mineral spirit-type) materials with flash point greater than 100° F (38° C). Do not use materials which state “FLAMMABLE” on the packaging. For more information about your material, request MSDS from distributor or retailer.
Use oil-based material outdoors or in a well-ventilated indoor area with a flow of fresh air.
Spraying certain materials may cause static build-up in the sprayer that can result in static shock to the user. If this occurs, first ensure the material has a flash point greater than 100° F (38° C) and does not state that it is FLAMMABLE anywhere on the package. If still feeling a static shock, the material likely con- tains a non-mineral spirits fluid such as, but not limited to, xylene, toluene, or naphtha, which can build up static. Switch to an alternative material.
