20
Lap/shoulder combination belt with a locking latchplate . Once it is buckled, this type of belt has a latchplate that will not allow the lap portion of the belt to loosen. This seat belt does not require a locking clip.
Lap/shoulder combination belt with a latchplate that can slide freely along the belt . This type of belt MUST be converted to prevent movement of the lap portion of the belt.
You must use the locking clip provided with the safety seat (see section entitled “To install the locking clip” on page 48), unless your vehicle’s seat belt can be converted in another way that is described in your vehicle owner’s manual. Failure to use the locking clip or convert the seat belt in another way will allow the safety seat to move out of position. See your vehicle owner’s manual or contact your vehicle manufacturer for more information.
