Models with | |
6. Buckle the harness to the latch between your |
|
child’s legs. Make sure that you hear a “click.” |
|
If the harness straps are not buckled, the safety |
|
seat provides NO protection for your child. DO |
|
NOT use the safety seat if the harness does not |
|
latch in place. Call Graco at |
|
7.From the back of the safety seat, pull the strap through the harness tightener to tighten the straps as shown . Make sure that both straps are flat and tight on your child’s shoulders.
8.Slide the strap back into the harness clip . This is easier to do when the harness clip is near the buckle.
9.Position the harness clip at the middle of the child’s chest, level with the armpits and away from the child’s neck .
10.Check that the harness straps are not twisted. Also, check that the harness is snug. You should not be able to insert more than one finger between the harness and your child’s shoulder .
39
