Upgrade Via
Firmware Server Path
Config Server Path
Firmware File
Prefix/Postfix
Config File
Prefix/Postfix
Allow DHCP Option 43 and Option 66 to override server
This field allows the user to choose the firmware upgrade/config server path method: TFTP, HTTP or HTTPS.
•TFTP:
GXP110x retrieves the new firmware files or new configuration file from the specified TFTP server path at boot time. If there is no new firmware file or configuration file, the system will start the boot process using the existing firmware or config file. If a TFTP server is configured and new firmware files are retrieved, the new downloaded image is saved into the Flash memory. (Please do NOT interrupt the TFTP upgrade process (especially the power supply) as this will damage the device.
•HTTP:
GXP110x retrieves the new firmware files or new configuration file from the specified URL or IP for the HTTP server. For example:
provisioning.mycompany.com:6688/Grandstream/1.0.0.6
Note: “:6688” is the specific TCP port where the HTTP server is listening; Omit if using default port 80.
•HTTPS:
GXP110x retrieves the new firmware files or new configuration file from the specified URL or IP for the HTTP server via a secured HTTP connection. For example:
provisioning.mycompany.com
Note: HTTPS default port is 443.
Defines the server path for the firmware server. It can be different from the Configuration server which is used for provisioning.
For example: firmware.mycompany.com:6688/Grandstream/1.0.0.6
Defines the server path for provisioning; it can be different from the firmware server.
For example: provisioning.mycompany.com:6688/Grandstream/gxp1100
Default is blank. If configured, GXP110x will request the firmware file with the prefix/postfix and only the firmware with the matching encrypted prefix will be downloaded and flashed into the phone.
Note: This setting is useful for ITSPs. End user should keep it blank.
Default is blank. If configured, GXP110x will request the config file with the prefix/postfix and only the file with the matching encrypted prefix will be downloaded and flashed into the phone.
Note: This setting is useful for ITSPs. End user should keep it blank.
Default is “Yes”. This allows device gets provisioned from the server automatically.
Grandstream Networks, Inc. | GXP1100/1105 User Manual | Page 20 of 34 |
| Firmware version: 1.0.1.110 | Last Updated: 01/2012 |
