SUBSCRIBE for |
Registration |
|
Voice Mail UserID |
Send DTMF |
DTMF Payload Type |
Early Dial |
Dial Plan Prefix |
Default is “No”. When set to “Yes” a SUBSCRIBE for Registration will be sent periodically.
SIP Extension to notify SIP server that the unit is behind the NAT/Firewall.
When configured, user can access messages by pressing “MSG” button. This userID is usually the VM portal access number.
Note: If server side feature code is used for VM portal access number, please also configure “Enable Call Features” to “No” under account setting page to use non- local feature code.
This parameter specifies the mechanism to transmit DTMF digit. There are 3 supported modes:
-In audio: DTMF is combined in audio signal (not very reliable with
-via RTP (RFC2833)
-via SIP INFO
Sends DTMF using RFC2833. The default is 101.
Default is “No”. Use only if proxy supports 484 responses.
Sets the prefix added to each dialed number.
Grandstream Networks, Inc. | GXP1100/1105 User Manual | Page 27 of 34 |
| Firmware version: 1.0.1.110 | Last Updated: 01/2012 |
