Grandstream Networks HT386 user manual Configuration Guide, Dhcp Mode

CONFIGURATION GUIDE

CONFIGURING HT–386THROUGH VOICE PROMPT

DHCP MODE

Follow Table 3 with voice menu option 01 to enable HT-386 to use DHCP.

STATIC IP MODE

Follow Table 3 with voice menu option 01 to enable HT-386 to use STATIC IP mode, then use option 02, 03, 04 to set up HT-386’s IP, Subnet Mask, Gateway respectively.

TFTP SERVER ADDRESS

Follow Table 3 with voice menu option 06 to configure the IP address of the TFTP server.

FIRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

CONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

UPGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP and HTTP.

FIRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode among the following three options: 1) always check, 2) check when pre/suffix changes, and 3) never upgrade

Grandstream Networks, Inc.	HT-386 User Manual	Page 17 of 34
	Firmware 1.0.3.64	Last Updated: 2/2007