Grizzly G0456 owner manual Inventory Components Figure Qty, Hardware not shown Qty

Inventory

After all the parts have been removed from the crate, you should have the following items:

Inventory Components (Figure 3)			Qty
A.	Lathe Bed (not shown)		1
B.	Stand Assembly (not shown)		1
C.	Sanding Table		1
D.	L-Brackets		2
E.	Tool Rest		1
F.	Spur Center		1
G.	Live Center		1
H.	Flat Wrench 113⁄16"		1
I.	Lock Pin		1
J.	Dust Port		1
K.	Lock Handles		2
L.	Miter Gauge		1
Hardware (not shown)			Qty
•	Hex Bolts 7⁄16"-14 x 3⁄4" (L-Brackets)		4
•	Flat Washers 7⁄16" (L-Brackets)		4
•	Lock Washers 7⁄16" (L-Brackets, Bed)		10
•	Flat Washers 1⁄4" (Handles)		4
•	Cap Screws 5⁄16"-18 x 5⁄8" (Table)		2
•	Lock Nuts 5⁄16"-18 (Table)		2
•	Flat Washers 5⁄16" (Table)		2
•	Phillips Screws 10-24 x 1⁄2" (Dust Port)		...... 2
•	Lock Washers #10 (Dust Port)		2
•	Cap Screws 7⁄16"-14 x 11⁄2" (Bed)		6
•	Hex Wrench 4, 5, 6, 8mm	1 Each
•	Open End Wrench 10/12mm		1

G0456 Variable Speed Wood Lathe

�	�	�
�	�	�
	�
�	�	�

Figure 3. Model G0456 inventory components.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

SUFFOCATION HAZARD!

Immediately discard all plastic bags and packing materials to eliminate choking/suffocation hazards for children and animals.

-11-