Grizzly G0456 Sanding Table, Tool Rest, To install the sanding table, To install the tool rest

Sanding Table
Components and Hardware Needed:	Qty
Sanding Table	1
Table Brackets	2
Dust Port	1
Lock Handles	2
Flat Washers 1⁄4" (Handles)	4
Cap Screws 5⁄16"-18 x 5⁄8" (Table)	2
Lock Nuts 5⁄16"-18 (Table)	2
Flat Washers 5⁄16" (Table)	2
Phillips Head Screws 10-24 x 1⁄2" (Dust Port) ...	2
Lock Washers #10 (Dust Port)	2
To install the sanding table:

1.Mount the dust port to the casting with the Phillips screws and lock washers.

2.Mount the table to the casting with the cap screws, flat washers, and lock nuts through the hinge hole; and with the lock handles and lock washers through the slotted hole. Figure 7 shows the table properly installed.

Figure 7. Table and dust port properly installed.

-14-

Tool Rest
Components and Hardware Needed:	Qty
Tool Rest	1
To install the tool rest:

1.Slide the tool rest shaft into the base, and tighten the lock handle. Figure 8 shows the tool rest properly installed in the base.

Lock Handle

Figure 8. Tool rest properly installed.

G0456 Variable Speed Wood Lathe