Grizzly G0612 SECTION 3: SETUP

G0612 6" Jointer -9-

Wear safety glasses dur-

ing the entire set up pro-

cess!

This machine presents

serious injury h azards

to untrained users. Read

through this entire manu-

al to become familiar with

the controls and opera-

tions before starting the

machine!

SECTION 3: SETUP

The jointer is heavy

(approximately 100 lbs).

DO NOT over-exert your-

self while unpacking or

moving your ma chine—

get assistance.

The Model G0612 was carefully packed when it

left our warehouse. If you discover the mac hine

is damaged after you have signed for delivery,

please immediately call Customer Service at

(570) 546-9663 for advice.

Save the containers and all packing materials for

possible inspection by the carrier or its agent.

Otherwise, filing a freight claim can be difficult.

When you are co mpletely satisfied with the con-

dition of your shipment, you should inventory the

contents.

The following items, needed to complete the setup

process, are not included with your machine:*

DESCRIPTION Qty

• People for Lifting ........................As Needed

• Straightedge ...............................................1

• Machinist's Combination Square ................1

• Flat Head Screwdriver ................................1

• Phillips Head Screwdriver ..........................1

• Wrench 10mm ............................................1

• Wrench 8mm ..............................................2

• Mounting Hardware ...................As Needed

(See Page 12).

• Degreaser and Rags .................As Needed