Inventory
After all the parts have been removed from the box, you should have the following items:
Jointer Box Contents: (Figure 4 & 5) | Qty | |
A. | Jointer Bed Assembly | 1 |
B. | Fence | 1 |
C. | Dust Collection Bag | 1 |
D. | Push Blocks | 2 |
E. | Fence Tilting Handle | 1 |
F. | Fence Bracket Assembly | 1 |
G. | Fence Sliding Handle | 1 |
H. | Locking Plate Assembly | 1 |
I. | Fence Support | 1 |
J. | Dust Chute | 1 |
K. | Dust Collection Bag Clamp | 1 |
Hardware (Not Shown) | Qty | |
• | Cap Screws | 6 |
• | Lock Washers 8mm | 6 |
A
B
Figure 4. Box contents 1.
C
K
• | Hex Wrench 4mm | 1 |
• | Hex Wrench 6mm | 1 |
• Pan Head Screw | 1 |
J
I
H
G
F
D
E
Figure 5. Box contents 2.
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.
NOTICE
Some assembly fasteners may arrive pre- installed on the machine. Check the mount- ing locations on the machine before assum- ing that any items from the inventory list are missing.
G0612 6" Jointer