Grizzly G0612 owner manual Squaring Stock

Squaring Stock

Squaring stock involves four steps performed in the order below:

1.Surface Plane on the Jointer—The concave face of the workpiece is surface planed flat with the jointer.

3.Edge Joint 0n the Jointer—The concave edge of the workpiece is jointed flat with the jointer.

4.Rip Cut on a Table Saw—The jointed edge of the workpiece is placed against a table saw fence and the opposite edge cut off.

2.Surface Plane on a Thickness Planer—The opposite face of the workpiece is surface planed flat with a thickness planer.

Previously

Surface

Planed Face

��

��

��

Previously

Jointed Edge

G0612 6" Jointer -23-