G0613/14 Swivel Mast Metal Cutting Bandsaw -15-
NOTICE
Some hardware/ fasteners on th e inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
Inventory
After all the parts have been removed from the
crate, you should have the following accesso-
ries:
Shipping Crate: (Figure 6 ) Qty
A. Splash tray .................................................1
B. Handle ........................................................1
C. Work Stop Arm ...........................................1
D. Work Stop Lock Lever ................................1
E. Work Stop Rod ...........................................1
F. Hardware ....................................................1
—Flat Washer 8mm ...................................8
—Hex Bolt M8-1.25 X 16 ............................8
—Flat Washer 10mm .................................4
—Hex Bolt M10-1.5 X 35 ............................4
—Hex Nut M8-1.25 ....................................8
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi -
ency, replacements can be obtained at your local
hardware store.
Figure 6. G0613/14 inventory.
A
B
C
D
F
E