Grizzly G5959Z instruction manual Unpacking, Piece Inventory

Unpacking

The Model G5959Z is shipped from the manufac- turer in a carefully packed carton. If you discover the machine is damaged after you have signed for delivery, please call Customer Service imme- diately at (570) 546-9663.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

The G5959Z is a heavy machine, 635 lbs. ship- ping weight. DO NOT

over-exert yourself while unpacking or moving your machine – you will need assis- tance and power equip- ment. Serious personal injury may occur if safe moving methods are not followed.

Make sure floor structure is capable of supporting the combined weight of the machine, acces- sories and people.

Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.

Piece Inventory

After all the parts have been removed from their containers, you should have:

1.Table Saw Cabinet (Not Shown)

2.Miter Gauge

3.Extension Wings (2)

4.Fence

5.Splitter/Guard Assembly

6.Splitter/Guard Support Shaft

7.Hardware Bag

8.Arbor Spanner Wrench

9.Open End Wrench (2)

10.Hex Wrench Set

11.Arbor Extension Assembly

12.Motor Cover

13.Dado Table Insert

14.Standard Table Insert (Not Shown)

15.Fence Angle Irons (2)

16.Fence Rail

17.Tool Box

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them; or for the sake of expedien- cy, replacements can be obtained at your local hardware store.

15

3

57

6 8 10

917

		11
13	12	2

15

16

4

Figure 6. G5959Z component layout.

G5959Z 12" Left-Tilting Table Saw -11-