![](/images/new-backgrounds/1283309/28330965x1.webp)
Rabbeting operations can also be accomplished using a conventional saw blade. To create a sin-
1.Clearly mark the width of the rabbet cut on your workpiece. Include marks on the edge of your workpiece so you can clearly identify your intended cut while the material is laying flat on the saw table.
2.Set the blade height to the depth of cut you wish to create.
3.If the rabbet runs the length of the material, adjust the fence so the blade is aligned with the inside of your rabbet channel.
4.Turn on your saw and make the first cut.
5.Turn off the saw and
6.Turn on the saw and make a second cut.
7.Continue to
8.
Instructions on using moulding heads have been intentionally left out. They are very dangerous when not used properly. Considerable skill and training beyond the scope of this manual are required to safely operate a moulding head. Serious personal injury could result if this warning is not fol- lowed.
G5959Z 12" |