![](/images/new-backgrounds/1283309/28330967x1.webp)
SECTION 7: MAINTENANCE
General
Regular periodic maintenance on your Model G5959Z will ensure its optimum performance. Check for the following conditions each time you use your table saw.
1.Loose mounting bolts.
2.Worn switch.
3.Worn or damaged cords and plugs.
4.Damaged
5.Inspect blade for damage.
6.Guard alignment and operation.
7.Any other condition that could hamper the safe operation of this machine.
!Disconnect power to the machine when perform-
ing any maintenance or repairs. Failure to do this may result in serious personal injury.
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
Wear safety glasses dur- ing the entire mainte- nance process. Failure to comply may result in serious personal injury.
Table
Table can be kept
V-Belt
Belt tension should be checked at least every 3 months; more often if using the table saw inten- sively. The
To check
1.Disconnect the table saw from the power source.
2.Squeeze the center of each
3.Note the amount of deflection. Deflection should be approximately 3Ú4" as shown in
Figure 42.