User Manual - Configuration Guide (Volume 3)

Chapter 1

 

Versatile Routing Platform

VoIP Configuration

 

 

Table VC-1-8Configuring the recovery method of voice board

 

 

 

 

 

 

Operations

Commands

 

 

 

 

 

 

Enable WATCHDOG

voip enable-watchdog

 

 

Disable WATCHDOG

voip disable-watchdog

 

By default, WATCHDOG is enabled.

1.3 VoIP Monitoring and Maintenance

Please use the command voip reset in the global configuration mode, and use the following commands show and debug in the privileged user mode.

Table VC-1-9VoIP monitoring and maintenance

Operations

Commands

 

 

Reset the voice board

voip reset slot-number

Display the call information of the voice port

show call-history voice-port number

Display the call statistic information of the KHT module

show kht statistics

Display the call control block information in the RCV module

show rcv ccb

Display the call statistic information between the RCV

show rcv statistic { all call cc error ipp proc

module and other modules

timer vpm vpp }

Display the voice port information

show voice-port number

Display various statistic information in the VPP module

show vpp [ channel channel-no]

Enable the debugging information output switch of the

debug h225 { asn1 event }

H.225.0 negotiated packets or events

 

Enable the debugging information output of the H.245

debug h245 { asn1 event }

negotiated packets or event

 

Enable the debugging information output of the KHT module

debug kht { all error ipp rcv timer vpp }

Enable the debugging information output of the RCV module

debug rcv { all cc error ipp timer vpm vpp }

Enable the debugging information output of the VPM module

debug vpm { all buffer command dsp em

 

error ipp port receive send }

Enable the debugging information output of the VPP module

debug vpp { all codecm error ipp kht rcv

 

timer vpm }

1)Display the call information of the voice port Quidway# show call-history voice-port 2

Voice-port 2 type FXS POTS, Line state is opened start outgoing call 4 times, 3 success receive incoming call 8 times, 6 success

the latest 10 calling number is: %1% called number 1001

%2% called number 1001 %3% called number 1001 %4% called number 1001

The above information indicates that the type of the voice port 2 is FXS, the line is in an activated status. Four calls are originated at this port, in which three are successful calls. There are eight calls received, in which six are successful. The ten latest called numbers originated at this port, if the calls are less than ten, it will display as per the actual calls.

2)Display the call statistic information of the KHT module Quidway# show kht statistics

KHT: Receive IPP packet, begin KHT flow:

0

1-12

Page 208
Image 208
Huawei v200r001 user manual VoIP Monitoring and Maintenance, By default, Watchdog is enabled