Huawei v200r001 user manual Configuration of Backup Center, Configuration of Hsrp

User Manual - Configuration Guide (Volume 3)
Versatile Routing Platform	Table of Contents

Table of Contents

Chapter 1 Configuration of Backup Center			1-1
1.1	Backup Center Overview		1-1
1.2	Configuring the Backup Center		1-1
	1.2.1	Configuration Task List	1-1
	1.2.2	Entering the Configuration Mode of the Main Interface to be Backed Up	1-1
	1.2.3	Specifying Backup Interface and Priority Used by the Main Interface	1-2
	1.2.4	Setting Delay Time for Switchover Between Main and Backup Interface	1-3
	1.2.5	Setting State-Judging Conditions for Logic-Channel Main Interface	1-3
	1.2.6	Setting State-Judging Conditions for Logic-Channel Backup Interface	1-4
	1.2.7	Configuring Routes for Main and Backup Interfaces	1-4
1.3	Monitoring and Maintaining of Backup Center		1-5
1.4	Typical Configuration of Backup Center		1-5
	1.4.1	An example of Backup Between Interfaces	1-5
	1.4.2	An Example of Multiple Backup Interfaces	1-5
	1.4.3	An Example of Logical Channel Backup Interface	1-5
	1.4.4	An Example of Multiple Backup Interfaces with a Logical Channel	1-6

Chapter 2 Configuration of HSRP			2-1
2.1	HSRP Overview		2-1
2.2	Configuring HSRP		2-2
	2.2.1	Configuration Task List	2-2
	2.2.2	Starting HSRP Function	2-2
	2.2.3	Setting Router’s Priority in HSRP Hot Standby Group	2-3
	2.2.4	Setting Router’s Preemption Mode in HSRP Standby Group	2-3
	2.2.5	Setting HSRP Authorization Word	2-3
	2.2.6	Setting HSRP Timer	2-4
	2.2.7	Monitoring the Specified Interface	2-4
	2.2.8	Using Actual Interface MAC Address	2-5
	2.2.9	Modifying Virtual MAC Address	2-5
2.3	Monitoring and Maintaining HSRP		2-6
2.4	Typical Configurations of HSRP		2-6
	2.4.1	An example for single hot standby group configuration	2-6
	2.4.2	An example for setting HSRP to monitor a specified interface	2-8
	2.4.3	An example for multiple hot standby groups configuration	2-9
2.5	Fault Diagnosis and Troubleshooting of HSRP		2-10

i