User Manual - Configuration Guide (Volume 3)

 

Chapter 3

Versatile Routing Platform

 

E1 Voice Configuration

Recv_R2_Alert_AP_ALERTING

:

0

Recv_R2_Alert_ELSE

:

0

Recv_R2_Unknow

:

0

}

 

 

The packets above show the interactive information between RCV module and R2 signaling, including the successful and failed number of the packets sent about the connection request acknowledgement, the successful and failed number of the packets sent about the activation acknowledgement, the number of the packets sent about onhook and offhook, the number of the connection request packets received, the number of the activation packets received, the number of the packets received about release, alert, unknown and etc.

5)Show the call statistics of R2 signaling Quidway# show r2 call-statistics

r2 signalling call statistics

30drop from state TK_BLOCKED_BY_PEER 1 drop from state TKI_WAIT_CALLED_NUM

2 drop from state TKI_WAIT_VPU_ACTIVE_ACK 2 drop from state TKI_CALLED_ONHOOK

1 drop from state TKO_SEND_CALLED_NUM 2 drop from state TKO_RELEASE_GUARD

The above packets show the call statistics related to R2 signaling: the block of the opposite end causes the drop of 30 calls; waiting for the caller number causes the drop of 1 incoming call; waiting for the activation acknowledgement of the voice channel causes the drop of 2 incoming calls; the onhook of the called number causes the drop of 2 incoming calls; sending the called number causes the drop of 1 outgoing call; releasing guard signal causes the drop of 2 outgoing calls.

6)Show the related information of VoIP Quidway# show voip down-queue 5

V = 0,I = 0,P

=

0,C

=

0,E

=

E1VI_NULL_EVENT, B

=

0

V = 0,I

=

1,P

=

0,C

=

0,E

= E1VI_NULL_EVENT, B =

0

……

 

 

 

 

 

 

 

 

 

 

V = 0,I

=

255,P

= 0,C

= 0,E

= E1VI_NULL_EVENT, B = 0

E1VI board 5

down interrupt queue is empty :

 

 

The above packets show the contents of the downstream interrupted queue between E1 voice board and router motherboard: V denotes valid bit, I is the serial number, P port number, C channel number, E event, and B blocked bit. The packets shown by show voip up-queueis the same as that of show voip down-queue.

Quidway# show voip version 0

[Slot 1] VI_NULL Hardware Version is 1.0, Driver Version is 1.0

The packets above show the hardware version and driver version of VI board.

III. debug Commands Related to E1 Voice

Please use the following debug commands in privileged mode for monitoring and maintenance.

3-14

Page 239
Image 239
Huawei v200r001 user manual III. debug Commands Related to E1 Voice, R2 signalling call statistics