User Manual - Configuration Guide (Volume 3)

Chapter 3

Versatile Routing Platform

E1 Voice Configuration

 

Table VC-3-4Configuration Commands of E1 Voice Port

 

 

 

 

Operation

Command

 

 

 

 

Enter voice port configuration mode

voice-portport-nunmber :ds0-group-number

 

Enable comfort noise setting

comfort-noise

 

Disable comfort noise setting

no comfort-noise

 

Establish PLAR mode connection for voice port

connection plar telephone-number

 

Delete the PLAR connection of the voice port

no connection plar

 

Configure the description information of the port

description string

 

Delete the description information of the port

no description

 

Enable echo cancellation function or set the time

echo-cancel { enable coverage coverage-time}

 

coverage of echo cancellation sampling

 

 

Cancel echo cancellation function or recover the default

no echo-cancel { enable coverage }

 

value of the time coverage of echo cancellation sampling

 

 

Set voice input gain

input gain value

 

Recover the default value of voice input gain

no input gain

 

Set echo cancellation to use non-linear processing

non-linear

 

procedure

 

 

Cancel echo cancellation’s use of non-linear processing

no non-linear

 

procedure

 

 

Configure voice output attenuation

output attenuation value

 

Recover the default value of voice output attenuation

no output attenuation

 

Disable the voice port

shutdown

 

Enable the voice port

no shutdown

By default, comfort-noise(i.e. enable comfort-noise effective and no connection plar (i.e. the system has connection initially) command becomes effective, and linear processing procedure) becomes effective.

setting) command becomes not established PLAR mode non-linear(i.e. enable non-

The default value of configuration command echo-cancel(enable echo cancellation) is enable. The default value of command echo-cancel coverage (time coverage of echo cancellation sampling) is 16ms. The default value of configuration command input gain (voice input gain) is 0. The default value of configuration command output attenuation (voice output attenuation) is 0.

3.2.6Configuring E1 Voice R2 Signaling

I.Configuring DS0 group

DS0 is the logical voice port abstracted from the actual E1 port by defining the time slot list, and it serves voice transmission. The time slots included in the DS0 group are all used to transmit voice, while the other time slots not included still can serve data information transmission. Only one DS0 can be defined on one E1 port. The R2 signaling configuration for E1 line is facilitated by configuring signaling type and the relevant parameters of R2 signaling for each DS0. When DS0 group is successfully configured, the system will create the voice port corresponding to the DS0 according to the current E1 port number and DS0 group number. The voice port number is “E1 port number: DS0 group number”.

For the commands in the table below, please use controller e1 in global configuration mode and the others in E1 controller interface configuration mode.

3-7

Page 232
Image 232
Huawei v200r001 user manual Configuring E1 Voice R2 Signaling, Configuring DS0 group