User Manual - Configuration Guide (Volume 3)

Chapter 1

Versatile Routing Platform

VoIP Configuration

The router can also support some special service functions provided by the SPC switch, such as:

---Do not disturb

After setting the “Do not disturb “ service, no matter if it is idle, the subscriber phone set will reject any incoming call request, and the caller will only hear the busy tone.

For the DTMF phone set connecting with the voice router, after off-hook, dial *56#, and the “Do not disturb” service is set. Dial #56#, the setting is removed.

---Call Forwarding on Busy (CFB)

After setting the “Forwarding on busy”, if the subscriber phone set is in seized status, the new incoming call will be forwarded to the specified phone set.

For the DTMF phone set connecting with the voice router, after off-hook, dial *58*ABCD, the CFB service is set. Dial #58#, the setting is removed.

Note:

ABCD represents the number of the phone you want to forward the calls to. Please note that this function only apply to phone set connecting with the router FXS port, and can only specify the phone set that connects to the same router as this phone set as forwarding destination; otherwise, the setting is invalid.

--- Call Forwarding Unconditional (CFU)

After setting the call forwarding unconditional, no matter the subscriber phone is busy or not, all the incoming calls will be forwarded to the specified phone set.

For the DTMF phone set connecting with the voice router, after off-hook, dial *57*ABCD and the CFU service is set. Dial #57#, the setting is removed.

Note:

ABCD represents the number of the phone you want to forward calls to. Please note that this function only apply to phone set connecting with the router FXS port, and can only specify the phone set that connects to the same router as this phone set as forwarding destination, otherwise it is invalid.

---Alarm clock service

After setting the alarm clock service, when the time set by the subscriber is up, the phone set will continue to ring for 45 seconds and then hang up. This function only validate during the 24 hours after setting.

For the DTMF phone set connecting with the voice router, after off-hook, dial *55*HHMM for the service setting and dial #55# to remove the setting.

Note:

HHstands for hour, the virtual value is integer within the range from 0 to 23, and MM stands for minute, the virtual value is integer within the range from 0 to 59.

1-5

Page 201
Image 201
Huawei v200r001 user manual Chapter