Inventory

 

Clean Up

 

 

 

 

 

 

After all the parts have been removed from the crate and boxes, you should have the following items:

Contents (Figure 9)

Qty

A.

Drill Press (not shown)

1

B.

JT#6 Keyed Chuck

1

C.

Chuck Key

1

D.

Hex Wrench 5mm

1

E.

Hex Wrench 4mm

1

F.

Rapid Downfeed Handle Shafts

3

G.

Rapid Downfeed Handle Knobs

3

H.

Table Crank Knob

1

I.

Drift Key

1

 

F

 

 

 

G

 

I

 

D

E

H

C

B

 

Figure 9. Model G9749 inventory.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them, or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed on the machine. Check these locations before assuming that any items from the inventory list are miss- ing.

-14-

The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser. Some parts may need to be removed for thorough cleaning. For optimum performance from your machine, make sure you clean all moving parts or slid- ing contact surfaces that are coated. Avoid chlorine-based solvents, such as acetone or brake parts cleaner, as they may damage painted surfaces should they come in contact. Always fol- low the manufacturer’s instructions when using any type of cleaning product.

Note: Refer to the Lubrication section on Page 26 to relubricate any necessary areas that have been cleaned with solvent during the Clean Up process.

Gasoline and petroleum products have low flash points and could cause an explosion or fire if used to clean machinery. DO NOT use gasoline or petroleum products to clean the machinery.

Many of the solvents commonly used to clean machinery can be toxic when inhaled or ingest- ed. Lack of ventilation while using these sol- vents could cause seri- ous personal health risks or fire. Take precautions from this hazard by only using cleaning solvents in a well ventilated area.

G9749 Variable Speed Drill Press

Page 16
Image 16
Grizzly G9749 owner manual Inventory Clean Up, Contents Figure Qty