The Model G9749 weighs 615 lbs. You will need power lifting equipment and assistance to remove this machine from the pallet and position it. Inspect all lifting equipment and make sure that all is in perfect working order and is rated for the load before attempting to lift and move this drill press. Ignoring this warning may lead to serious personal injury or death.
Unpacking and
Lifting
The Model G9749 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi- tion of your shipment, you should inventory the contents.
To unpack and move the drill press:
1.Read this entire SETUP section before continuing. Pay special attention to Site Considerations on Page 11 and Mounting to Shop Floor on Page 13.
2.Remove the sides and top of the shipping crate.
3.Position the lifting straps under the headstock as shown in Figure 6. Make sure the straps are not in contact with any controls, wires, or handles.
Figure 6. Location of lifting straps.
4.Position lifting straps, your lifting device, and your assistant to support the drill press in a vertical and stable position.
5.Unbolt the drill press from the pallet.
6.Slowly raise the drill press from the pallet, then carefully move the drill press to your prepared location.
7.With the drill press securely resting on the floor, shim between the floor and drill press base as required to level the drill press table.
8.Secure the drill press to the floor, but DO NOT overtighten the fasteners.
9.Recheck the table to make sure that it is still level, and re-shim as required.
G9749 Variable Speed Drill Press |
